Quad-Rings
These seals are used today around the world for a wide variety of static and dynamic sealing applications. To minimize breakaway friction, an O-Ring groove must be wide enough to allow rolling or twisting of the seal.
In the long stroke of a reciprocating seal application, this twisting action can strain and eventually tear the rubber, causing a failure mode known as spiral twist.
To prevent spiral twist, the Quad-Ring four-lobed configuration is designed to withstand the distortion and extrusion often caused by high or pulsating pressure. To accommodate these forces, a Quad-Ring seal uses a narrower groove than a comparable O-Ring seal.
Longer Seal Life Because less squeeze means less friction with the four-lobe design, seals last longer. Therefore, equipment in which the Quad-Ring seal is installed will operate longer and require less maintenance.
No Parting Line on Sealing Surface Unlike O-Rings, where parting lines are on the sealing surface, Quad-Ring parting lines lie between the lobes, away from the sealing surface. This design eliminates the problems of leakage resulting from a parting line’s irregular surface.
O-Rings Cords
Our O ring Cords in Higher Precision Tolerances.
O ring Cords are mainly used in Static Applications or in large diameter sealing where O rings are unviable. Custom sizes can be made in short time as most of the Cords join using Cyno-Acrylate adhesives serving as an immediate replacement for endless O rings.
O-Ring cord for fast, on the spot production of O-Rings. Available in diameters between 1 mm to 12 mm.
Nitrile is suitable for use within applications running at a maximum continuous temperature of 120°C (or up to 150°C intermittently). Use below -30°C requires special consideration.
O-Rings Kit Boxes
We provide imperial and metric range of o ring kit box made of good quality material and unbeatable price range. A collection of sealing related components., Applicable in hydraulic and pneumatic applications
It’s a doughnut-shaped loop designed to prevent the passage of liquids or gases. It’s one of the simplest precision mechanical pieces ever produced, and continue to be one of the most widely-utilized sealing products
O-Rings are used within dynamic reciprocating applications, usually hydraulic or pneumatic piston or rod seals. For short stroke applications, smaller diameter O-Rings perform well.
Commercial grade Nitrile Butadiene Rubber (NBR) formulation featured with excellent oil and UV resistance. It Includes 30 common standard sizes with 386 Pieces. In O Ring box, sizes and number of pieces will be differ as per box category.